Alinco DR135TMKIII VHF 2m Meter Transceiver

WalcottCB.com
Communications and mobile electronics leaders for over 2 decades

Alinco DR135TMKIII

Alinco DR135TMKIII VHF 2m Meter Transceiver

Alinco DR135TMKIII $209.95
[x] Temporarily Out of Stock
TEXT_NO_PRODUCTS
Alinco DR-135TMKIII VHF FM Transmitter

Alinco DR135TEMkIII (aka DR-135T, DR-135T/EMKIII) Monoband Mobile/Base

This full featured 2M FM transceiver is a great radio for newly liscensed HAMs. Adjustable power output from 50, 10, or 5 watts.

Features

  • Alinco DR135TMKIII (aka DR-135T, DR-135T/EMKIII) Monoband Mobile/Base
  • Voice-only FXE-version available (European model only, EJ-41U/47U not usable).
  • EJ-41U internal TNC board is available as an option for 1200/9600bps packet
  • 50 watts, H/M/L power settings
  • 100 memory channels
  • Front panel data port
  • Rear panel DSUB9 computer connection
  • No need to remove mic for packet operation
  • Ignition key on/off feature
  • CTCSS, DCS encode+decode, DTMF encode and Tone-burst are all standards
  • Clean, clear Alinco audio
  • Super-wide 7 character alphanumeric display
  • Wide and narrow FM modes (16K0 & 8K50F3E)
  • Theft alarm feature
  • A large, palm-fitting commercial-grade backlit microphone with a metal connector (not a modular plug) as well as direct frequency input and direct multi-function access such as monitor, call channel, power setting, memory to VFO plus more!
  • Stays in mode you select (voice/packet) through power off cycles
  • Ten autodial memories

Specifications

  • Frequency Range:TX(T): 144-147.995MHz (FM) RX(T): 118-135.995 MHz (AM) 136-173.995MHz (FM) TX & RX(E): 144-145.995MHz
  • Operating mode: 16K0F3E (FM)/8K50F3E (Narrow-FM) F1(9600bps)/F2(1200bps)/10F3 * 1 /A3E (RX only DR135TMkII)
  • Channel steps: 5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 KHz
  • Memory channels:100 channels + 1 quick recall (CALL)
  • Antenna Connector: BNC (50ohm unbalanced)
  • Frequency stability:+/- 2.5ppm TCXO
  • Supply voltage:13.8V DC +/- 15% negative ground
  • Temperature range: -10 - +60c (14 - 140F)
  • Dimensions: 142(W) x 40(H) x 174(D) mm 5.59"(W) x 1.57"(H) x 6.85"(D)
  • Weight: Approx. 1.0Kg (35.3oz)
  • CTCSS tone: encoder/decoder 39 tones
  • Digital Coded Squelch: -encoder/decoder 104 codes
  • Output power: Approx. 50W (HI) Approx. 20W (MID) Approx. 5W (LOW)
  • Modulation system: Variable reactance frequency modulation
  • Spurious emission: Less than -60 dB
  • Maximum frequency deviation: +/- 5 KHz (FM) / +/- 2.5 KHz (NFM)
  • Receive system: Double-conversion superheterodyne
  • Sensitivity(-12dB SINAD) *2: Less than -16.0dBu
  • Intermediate frequency: 1st IF 21.7 MHz, 2nd IF 450 KHz
  • Selectivity *2: -6dB: 12KHz or more -60dB: 28KHz or less (FM) -6dB: 6KHz or more -60dB: 16KHz or less (NFM)

Accessories

  • DC Power Cord
  • Mounting Bracket
  • Microphone
  • Alarm cable A (with wire) & Alarm cable B (extension use)
  • Instruction manual
  • Theft Alarm Stickers 2pcs
  • Hardware kit for bracket

Dimensions

  • Length: 6.85"
  • Width: 5.59"
  • Height: 1.57"

Similar Products: