This is a complete CB System for Truck Drivers using conventional mirror arms (eg Freightliner? FL, 120, Classic; Peterbuilt? 379, 378, 377; and any other trucks that accept mirror mounts). Quality, performance, and value. The Uniden PC78LTW offers illuminated faceplate, access to NOAA weather broadcasts, SWR Meter, Mic Gain, RF Gain, Automatic Noise Limited, Noise Blanker, and the Uniden exclusive Dynamic Squelch System. Not stopping there, the high performance 4 foot FS series from Firestik is included with this bundle as well as 18 feet of RG58 coax cable, Stainless Steel Bracket & Spring and aluminum Stud. To top everything off we?ve included the crystal clear noise cancelling Astatic 636L microphone, this is not a tin can system. This is a complete solution!

Astatic 636L Dynamic High Quality Noise Cancelling Mic [636L]
The Industry Standard for over 70 years. The 636L is a noise canceling dynamic microphone that was designed for close talking handheld applications in CB, Amateur Radio and SSB communications. The 636L is used in situations where there is high background noise levels, such as trucks. Our commercial version of this mic is used in public service agencies, such as fire departments all over the United States. The 636L has a rugged housing, polyurethane coated steel grille screen and a dependable low impedance dynamic element.

40 Channel CB Radio w/ NOAA Weather! [PC78LTW]
This trucking legend gives you backlit control knobs, a rugged front mic, 7 weather channels, a 40 channel auto noise/noise blanker switch, instant channel 9, a squelch control, RF gain, a mic gain, a channel selector, and a TX/RX indicator. The PC 78LTW also includes SWR calibration, S/RF/SWR/Mod, a signal meter, antenna warning, and a weather alert system which alarms upon receiving severe weather broadcasts.

Firestik SS64A Stainless Steel Mounting Bracket & Stud [SS64A]
These are the stainless steel versions of our most popular mounts! The mounting clamp can be positioned horizontally for horizontal mirror arms and rails, or vertically for vertical mirror arms or rails. The clamp may be omitted which will allow the angle bracket to be used as a side bracket on any flat vertical surface, such as the side of a motorhome or back of a Jeep. The SS-64A model has our world famous K-4A stud mount with screw on coaxial termination. All models come complete with stainless steel mounting hardware.

Single 18 Foot Coax With PL259 Connectors [K8A]
Firestik 18? 95% shielded stranded center conductor coaxial cable.

Stainless Steel Spring [SS3H]
Every antenna should have a spring. Springs protect the antenna, mount and vehicle. This spring is made from long lasting, top grade electro-polished stainless steel. The upper and lower inserts are made of chrome-plated machine brass and have standard 3/8"-24 threads to fit all Firestik antennas, mounts and accessories. This heavy duty model may be used with antennas up to 60". Physically, each spring is about 3.0" (76mm) tall with a diameter of 0.800" (20mm).

Firestik FS Series 4' Antenna (white) W. Tunable Tip [FS4W]
The "FS" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced shaft. Each is wound with heavy insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas. The tunable tip mechanism is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning.